Shrink Packaging Equipment

High Production Semi-Automatic L-Sealers
Shanklin Models S-24B, S-24C

This machine is no longer manufactured, Parts and Service are still avalilable.

Contents
	Shanklin S-24B and S-24C Specifications Drawings

S-24B and S-24C Shrink Wrappers

•	Automatic sealing cycle	•	Easy access electrical controls
•	Power film unwind	•	Automatic package discharge
•	Easy loading film inverting head

S-24B / S-24C
The Model S-24B is built for applications that require packaging line speeds approaching those of fully automatic sealers, but where equipment cost is a factor or where the product does not lend itself to automatic handling. Centerfolded film is dispensed from an EZ load unwind over and through the film inverting head, leaving an opening into which the product can be inserted. With one smooth motion, the operator inserts the product into the film and onto the sealing area, and then presses the “SEAL” buttons. The seal is made and then the package is automatically conveyed to the shrink tunnel. The Model S-24B is available with line operation feeding from left to right.

SPECIFICATIONS
Special Features:	Power film unwind. Film inverting head. Package positioning guide. Hole punch.
Sealer Size:	15" W x 33" L (20" W and 40" L available)
Machine Height:	Adjustable form 31" to 43"
Floor Space:	4-1/2' x 7' approximately
Package Speeds:	20-30 packages per minute
Electrical Requirements:	220 Volts, 20 Amps, 1 Phase (U.L listed control panel)
Compressed Air:	0.5 CFM @ 50 PSI
Mechanical Adjustments:	Discharge conveyor height. Packing table and inverting head depth. Film roll guides. Machine height.
Electrical Controls:	"Seal" and "Open" switches. Wire temparature control. Sealing wire voltage controls. Power unwind reversing switch. Dwell timer. Conveyor timer.
Pneumatic Controls:	Air filter, Regulator, Lubricator, Gauge Flow control valves on sealing arm.
Safety Devices:	Automatic force sensor opens sealing arm if resistance to closing is encountered prior to locking.
Accessories:	Adjustable depth inverting heads. Adjustable height inverting heads. Teflon coated inverting head. Special parts for 18" or 20" width capability available. Scrap removal system (vacuum or winder) Hot knife seal system. Static eliminator. Film centerfolder. Power film opener. Air table infeed. Casters.