Shrink Packaging Equipment

High Speed Modular Sleeve Wrapper
Shanklin B2BB

Contents
	Shanklin B2BB Specifications Drawings

B2-BB High Speed Sleeve Wrapper

•	Programmable Logic Controller	•	24 Volt Controls
•	Variable Speed Unwind	•	Light Package Film Prefeed
•	Faulty Film Cut Detect	•	Variable Speed HD Infeed
•	Light Post Indicator	•	Variable Speed HD Discharge

Description

The Model B-2 is a versatile machine for bundling products or clusters of products in an open-ended envelope of shrink film. When the enveloped product enters the shrink tunnel, the film is drawn tightly around the product and open ends of the sleeve close to a fraction of the original size.

Since sleeve wrapping applications are varied, the Model B-2 is modular in concept to permit customizing the machine to the application. The Model B-2 is offered in 30" and 40" widths and 15" to 20" height capacities. Several types of infeed and discharge conveying mechanisms are available. The Model B-2 with its hot knife seal jaws makes strong, reliable seals.

Specifications

Film Width and Diameter:	30" W x 11" Dia. - Standard 40" W x 11" Dia. - Optional
Package Height:	15" Max. - Standard 20" Max. - Optional
Package Speeds:	Up to 25 per minute.
Floor Space:	52-3/8" W x 73" L x 78-1/2" H 62-3/8" W x 73" L x 78-1/2" H
Seal System:	Choice of Hot Knife or Cool Cut
Conveyor Height:	33" - standard 37-1/2" w/ Casters
Electrical Requirements:	230 Volts, 15 Amps, 1 Phase (UL Listed Control Panel)
Compressed Air:	3 CFM free air @ 60PSI
Electrical Controls:	Separate temperature controls for top and bottom seal heat. Main breaker. Start and stop buttons. Seal heat control circuit power. Conveyor speed adjustment knobs. Unwind enable switch. Manual seal buttons. Automatic / Manual mode buttons. Touch pad operator interface. Reset.
Pneumatic Controls:	Air Filter, Regulator, Lubricator, Gauge Flow control valves on sealing arm and insertion arm cylinders
Safety Devices:	Safety on seal arm instantly opens arm and shuts off machine in case of jam. Safety interlocks on.
Options:	Low film detect. End of film detect. 208 or 460 Volt.