| 
- Low Initial Cost
- Energy efficient instant on/off heaters
- Automatic Cycle
|
- Timer Controlled repeatability
- Self-contained, requires only electrical connection (No compressed air required)
- Latest safety features
|
Description
The model EZ-SKIN is an economically priced, free-standing skin pack machine designed to meet low to moderate production requirements. It incorporates a stationary energy saving heating system with instant on/off heaters, which come up to heat instantly during cycles and turn off for loading/unloading. The EZ-SKIN features automatic cycle control for precision repeatability and is a heavy duty design, using the finest materials and components to insure years of dependable trouble-free operation. The EZ-SKIN is a completely self-contained machine, requiring connection to electrical supply only, for full operation.
Operation
The operator places the master card onto the machine bed, loads product and depresses the two-hand start buttons to initiate the automatic skin cycle, the heater turns on over the film in the clamp frame, (an adjustable timer controls heat time) at the end of the heat time, the clamp frame descends and the automatic skin cycle takes plate. Timer controlled vacuum is initiated, the heater remains on for a seal dwell - time and then turns off. The cool cycle takes place and the package is finished. The operator opens the clamp frame, moves the finished skin packed card out of the form area, the film is simultaneously reloaded in the clamp frame. After the frame is closed, the film is manuaily slit ( or the optional automatic hot wire film cut-off separates the film. The skin packed board is now ready for fast and accurate trimming on a Zed EZ-Trim or STP hydraulic die cutter and the skin pack cycle can be activated.
Specifications
| Skin Pack Board |
18" x 24", 24" x 30" 24" x 36" & 30" x 36" |
| Cycle Times |
adjustable, 15- 60 sec./normal |
| Part Height |
4" max. std. |
| Electrical |
220 Volts, 3 phase, 50 - 100 amps (dep. on size) |
| Air Requirements |
NONE required |
| Weight |
1000 - 3500 lbs., approx. (dep. on size & options) |
| Vacuum system |
Self-contained, 18" x 24" single turbine, 24" x 30" & larger, dual turbine. |
| Size |
30"W x 78"L x 65"H, approx. (18" x 24")
40"W x 96"L x 65"11, approx (24" x 30")
40"W x 108"L x 65"H, approx (24" x 36")
48"W x 108"L x 65"fl, approx (30" x 36") |
Diagram
Options
- Hot wire film Cut-Off system; mounted in clamp frame
- Electronic vacuum control (allows control of vacuum pressure for complicated skin parts)
- Alternate voltages, 208, 415, 440, 460, 480, rather than standard 220 volt system
|
