PRODUCTION
- 30-40 pallets per hr., based on load configuration and machine options.

LOAD WEIGHT
- 4,000 lbs

MACHINE DIMENSIONS
- 56"W x 98"L x 93"H.

LOAD SIZE
- 56"W x 56"L x 80"H.

ELECTRICAL REQUIREMENTS
- 120/1/60 15A (Default)
- 230V/3/60 10A or 240/1/60 10A
* Upon P.O request

APPROXIMATE SHIPPING WEIGHT
- 1,171 lbs.

CONTROLS

• 24V control system.
• Current overload protection.
• NEMA 4/12 control cabinet mounted on tower.
• Autoheight sensing photoeye with On/Off switch.
• Power indicator light.
• Separate Start/Stop push button and large emergency stop (push pull type).
• Manual carriage up/down switch.
• Variable table speed (15 RPM).
• Up/down carriage speed.
• Separate top and bottom wrap selectors (1-10).
• Reinforced wrap/manual rotation control.
• Positive turntable alignment.

FILM DELIVERY SYSTEM

• NO-THREAD Powered Pre-Stretch Carriage.
• 50-300% pre-stretch ratio (preset to customer spec. Std 200%).
• Electric film tension control with linear device.
• Film roping bar.
• Lexan roller cover.

FILM CARRIAGE DRIVE

• 1/2 HP AC motor with variable frequency drive.
• Two #40 chain carriage lifts for safety.
• Dual ½” CRS ways with UHMW-PE carriage glides.

TURNTABLE

• 56" X 56" X 1/4” diamond plate formed steel octagonal table.
• 5X- High capacity table support casters containing roller bearings with easy access center grease nipple.
• 8-3/4" Turntable Elevation - Competitive models are typically 12" to 13".

TURNTABLE DRIVE

• Max. 15 RPM variable speed.
• 1/2 HP AC motor with variable frequency drive.
• #50 ANSI heavy duty chain drive.
• Electronic softstart / softstop.
• Positive turntable alignment controlled by proximity sensor.

STRUCTURE

• 14 gauge formed steel tower.
• Forklift portable base design (from both ends).
• Heavy duty structural steel construction.

TECHNICAL INFORMATION

• The machine is provided with a manual including electro/mechanical schematics and drawings.
• Troubleshooting guide.
• Installation instructions.

WARRANTY

• Full 3 year warranty.